Freight for construction and infrastructure
Lifetime Logistics Services LLC delivers construction and infrastructure freight to job sites, yards and suppliers across the western states: lumber and trusses, rebar, pipe, precast, solar racking, electrical gear and the light equipment crews use on site. Open deck loads go to vetted carriers on flatbeds, step decks and hot shots, while boxed materials can ride in the 53 foot dry vans our own trucks pull, all dispatched from Covina, California. Fill in the quote form or dial (562) 566-8953 with the materials, the weight and the site address to get a price.
Building materials and how they ride
Most of what goes into a building is handled from the side of the trailer. Lumber units, roof trusses, drywall, rebar, structural steel, block and pipe go on flatbeds and come off by forklift or telehandler, and anything taller than a standard deck allows moves to a step deck. Boxed and palletized materials, such as tile, flooring, fixtures, doors, windows and electrical supplies, travel dock to dock in an enclosed van and stay dry all the way.
Tarps are part of the plan for anything that should not get wet. Lumber and drywall ride covered, and so do insulation, windows and painted steel. Mention it when you ask for a price, since covering a load takes extra time at pickup and the truck must arrive with the right tarps.
Delivering to a job site
Building sites work differently from warehouses. There may be no dock, no paved yard, a gate that opens at seven and a foreman who has to be found before anything comes off the truck. Tell us the site contact, the gate hours and what will unload the truck, so we can pass them to the carrier and the driver before the load leaves. If the site is dirt, steep or tight, say so, since a full length 53 foot rig may have no room to turn around there.
Smaller deliveries fit smaller trucks. A hot shot brings one machine part or a few bundles of material to a site that cannot wait, while a liftgate straight truck can set palletized supplies down where no forklift is available.
Infrastructure work
Roads, water systems, power lines and solar fields consume heavy, awkward freight: pipe for water and sewer mains, culverts and precast vaults, guardrail and sign structures, cable reels, transformers and switchgear, and racking and panels for solar arrays. Most of it rides on open decks, and taller pieces go on a step deck.
Oversize or very heavy pieces, meaning anything past the legal width, taller than the road allows or over a standard trailer's weight rating, travel on state permits, and some need escort vehicles. They are not routine for us: we check whether a vetted carrier can take one and tell you straight. For transformers, switchgear and other gear bound for data centers and power projects, see our data center freight page.
Lanes that feed construction
Phoenix makes and stocks building material and solar racking for coastal projects too, and open deck trucks carry it to San Diego County on Phoenix to San Diego. Housing and resort projects in the Las Vegas valley draw rebar, trusses, precast and solar material up the Interstate 15 lane from San Diego, and fabricated steel, glass and curtain wall from Bay Area shops arrive by the San Francisco lane.
In the north, lumber, steel and roofing climb Interstate 80 on Sacramento to Reno, tarped and strapped for the summit, and the growing towns of southern Utah take lumber, trusses, block and pipe on our St. George lane. Front Range builders draw steel, pipe and machinery over the Rockies on the Denver lane.
Who hauls it and what we need
Our own tractors are set up for 53 foot dry vans, while flatbeds, step decks and hot shots come from independent carriers that we screen through Highway and manage under our broker authority, USDOT 3711199 and MC 1302550. One Covina dispatcher answers your call, lines up the truck and follows it until the site signs for the load. For a quote, send:
- Materials, piece count, the longest and heaviest piece, and total weight
- Site address, gate hours, a contact on site and how the truck will be unloaded
- Any piece that may be oversize: over the legal width, or taller than an ordinary deck can carry
- Tarping needs, and the date the site can take the delivery
Questions shippers ask
- What if nobody on site can unload?
- Heavy bundles cannot come off a flatbed by hand. Palletized materials can go on a straight truck whose liftgate lowers them to the ground, and for heavier pieces we look case by case for a carrier whose truck has its own unloading gear. Tell us before the truck is booked.
- Can you move a piece of equipment to a site?
- Light equipment that fits a hot shot or a standard deck, such as a compact loader or a small skid steer, yes, through vetted carriers. Oversize or very heavy machines are not routine for us; send the make, model, weight and measurements, and we will check whether a vetted carrier can take it and tell you straight.
- Can a 53 foot trailer reach my site?
- Often, but not always. Tight streets, soft ground and sharp turns can stop a full length trailer. Shorter flatbeds, hot shots and box trucks are the answer when it cannot.
- How far ahead should I book a construction delivery?
- A few days ahead for a standard flatbed load, and longer for oversize pieces that need permits. Give us the site's delivery window as early as you can, since many projects only accept trucks on certain days.
Ready to price a load?
Send the quote form or call us. Quotes within 15 minutes, Monday to Friday 6 AM to 6 PM Pacific; operations team available 24/7 for active loads.