Truckload cost calculator
The truckload cost calculator from Lifetime Logistics Services LLC shows what a full truck load costs today between two western freight markets, with a low, typical and high estimate for each trailer we price, the road miles and the date the figures were computed. The numbers come straight from our own lane history and that morning’s diesel price, and a lane with no published estimate says so instead of guessing. For a firm price on your load, use the quote form on this page or call (562) 566-8953.
Price a lane
Loading today’s lanes.
Every lane with an estimate today
Computed November 18, 2026 (Pacific) from our own lane history and that morning's diesel price. Full truckload, US dollars per load, one way. Full truckload, linehaul including fuel, before accessorials such as detention or lumper.
| Lane | Miles | Trailer | Low | Typical | High | Per mile |
|---|---|---|---|---|---|---|
| El Paso, TX to Dallas-Fort Worth, TX | 656 | Dry van | $1,900 | $1,950 | $2,050 | $2.97 |
| El Paso, TX to Las Vegas, NV | 729 | Dry van | $1,850 | $1,975 | $2,125 | $2.71 |
| Eugene, OR to Modesto, CA | 560 | Dry van | $1,350 | $1,425 | $1,725 | $2.54 |
| Eugene, OR to Stockton, CA | 531 | Dry van | $1,075 | $1,175 | $1,525 | $2.21 |
| Inland Empire, CA to Flagstaff, AZ | 455 | Dry van | $3,525 | $3,550 | $3,600 | $7.80 |
| Inland Empire, CA to Fresno, CA | 267 | Dry van | $1,775 | $1,800 | $1,825 | $6.74 |
| Inland Empire, CA to Inland Empire, CA | 2,169 | Power only | $4,600 | $4,600 | $4,900 | $2.12 |
| Inland Empire, CA to Los Angeles, CA | 55 | Dry van | $650 | $700 | $725 | $12.73 |
| Inland Empire, CA to Phoenix, AZ | 319 | Dry van | $1,900 | $2,350 | $2,950 | $7.37 |
| Inland Empire, CA to St. George, UT | 344 | Dry van | $1,300 | $1,350 | $1,450 | $3.92 |
| Inland Empire, CA to Victor Valley, CA | 50 | Flatbed | $875 | $875 | $925 | $17.50 |
| Inland Empire, CA to Visalia, CA | 190 | Dry van | $1,025 | $1,050 | $1,075 | $5.53 |
| Long Beach, CA to El Paso, TX | 807 | Dry van | $3,525 | $3,800 | $3,975 | $4.71 |
| Los Angeles, CA to Inland Empire, CA | 55 | Dry van | $675 | $700 | $725 | $12.73 |
| Los Angeles, CA to Las Vegas, NV | 272 | Dry van | $1,725 | $1,775 | $1,875 | $6.53 |
| Box truck or cargo van | $950 | $1,000 | $1,125 | $3.68 | ||
| Los Angeles, CA to Los Angeles, CA | 14 | Dry van | $625 | $675 | $700 | $48.21 |
| Phoenix, AZ to Coachella Valley, CA | 268 | Dry van | $750 | $775 | $800 | $2.89 |
| Phoenix, AZ to Inland Empire, CA | 333 | Flatbed | $1,150 | $1,200 | $1,225 | $3.60 |
| Phoenix, AZ to Las Vegas, NV | 293 | Dry van | $1,000 | $1,025 | $1,125 | $3.50 |
| Phoenix, AZ to Long Beach, CA | 369 | Flatbed | $1,200 | $1,250 | $1,275 | $3.39 |
| Phoenix, AZ to Los Angeles, CA | 359 | Flatbed | $1,225 | $1,250 | $1,275 | $3.48 |
| Phoenix, AZ to Salinas, CA | 678 | Flatbed | $2,450 | $2,500 | $2,575 | $3.69 |
| Phoenix, AZ to San Diego, CA | 343 | Flatbed | $1,175 | $1,200 | $1,275 | $3.50 |
| Salinas, CA to Inland Empire, CA | 334 | Dry van | $800 | $800 | $850 | $2.40 |
| Salinas, CA to Los Angeles, CA | 305 | Dry van | $700 | $800 | $850 | $2.62 |
| Salinas, CA to Orange County, CA | 325 | Dry van | $750 | $775 | $850 | $2.38 |
| Flatbed | $1,300 | $1,375 | $1,525 | $4.37 | ||
| Stockton, CA to Los Angeles, CA | 355 | Dry van | $750 | $775 | $775 | $2.18 |
| Visalia, CA to Inland Empire, CA | 189 | Dry van | $725 | $725 | $775 | $3.84 |
| Visalia, CA to Los Angeles, CA | 174 | Dry van | $725 | $750 | $775 | $4.31 |
Estimate from our own lane history and today's diesel price. Ask for a firm quote. The main western lanes as CSV, text and RSS: the West Coast truckload rate index.
How the calculator works
Choose where the freight starts, where it is going and the kind of trailer it needs. The picker only offers markets that appear in today’s estimates. Not every pairing has an estimate today; when one does, you get three figures: a low one for a soft day on that lane, a typical one where most recent loads settled, and a high one for a tight day. Under them sit the road miles, the cost per mile at the typical figure and the morning the numbers were built.
A market here means a freight area, not a single street address. Los Angeles covers roughly thirty miles around downtown and the port, while Ontario, Fontana, Riverside and San Bernardino make up the Inland Empire next door. A pickup at the far edge of either adds a few miles, which is one reason the answer is a range rather than one exact figure.
Miles set the starting point
Distance is the first thing any carrier prices. Each mile burns diesel and wears tires and brakes, and it pays a driver who may legally drive eleven hours in a shift before ten hours off. That limit is why a trip of six or seven hundred miles turns into an overnight run with a sleeper berth, and why a lane past a thousand miles usually needs three days.
Longer trips cost more in total but less for each mile. A driver spends about the same time backing into the dock, waiting for a forklift and getting paperwork signed on a two hundred mile run as on a twelve hundred mile one, and on the short run that dead time is spread over far fewer paid miles.
Diesel is built into every figure
Fuel is the cost that swings most from one week to the next, so the model reads the federal weekly diesel price each time it rebuilds and folds it into the estimate. You will not see a separate fuel surcharge line here: what the calculator shows is the linehaul with diesel already counted. When the pump price climbs for a few weeks in a row, the figures for long lanes move first, because they burn the most gallons.
The trailer changes the price
Dry vans are the most plentiful equipment on western highways, which makes them the usual baseline. Flatbeds are scarcer and the driver straps, chains and often tarps the freight by hand, so an open deck typically prices above a van on the same road. Power only means our tractor and driver pull a trailer you already have; with no trailer of ours tied up, it can come in under both. A box truck suits a smaller shipment that should travel by itself without paying for a whole 53 foot trailer.
Not every lane carries every trailer. If you choose one the model has no figure for on that road, the calculator tells you which trailers it does price there and points you to the quote form for the rest.
Direction and the ride home
Two cities can price differently depending on which way the freight moves. Places that receive far more than they ship, such as Phoenix and Las Vegas, leave carriers hunting for a load back, so trucks leaving those markets often go cheaper than trucks heading in. Try a lane both ways in the picker; when the feed has both directions, the gap tells you which side of the trip is scarce today.
Season and how much notice you give
Capacity tightens at the same points every year. Retail freight into the Inland Empire warehouses climbs from October through the holidays, produce out of the Salinas and San Joaquin valleys pulls trucks north and south in the growing months, and the last days of a month or quarter bring a rush of shippers trying to close their books. In those weeks a load sits nearer the high figure.
Notice matters too. A truck booked the afternoon before pickup takes whatever is still free nearby; three or four days of lead time lets a dispatcher match your freight to a driver who is already heading your way.
What the estimate leaves out
Each figure covers one full truckload, picked up at one dock and delivered to another. Charges that depend on what happens at those docks come on top only when they occur: detention when a driver waits past the free time, a lumper fee where a warehouse unloads with its own crew, a layover when an appointment slips to the next day, extra stops, and tarping on a flatbed. A good quote names any that apply before the truck is sent.
Oversize freight that needs permits or escorts is priced on its own, outside these estimates. Refrigerated loads are not covered either: our records hold no reefer loads, so the model has no honest basis for a reefer figure and the calculator offers none.
When your lane shows no estimate
The model only publishes a figure where our own history on that road, or on lanes close to it, is deep enough to stand behind. A missing pairing is not a lane we turn away. It simply gets priced by a person instead of a formula: send the quote form with both cities, the pickup date, the weight and the trailer, and dispatch replies with a firm number for your date.
The same is true when the feed itself is late. If today’s estimates have not arrived, the calculator says so and shows nothing, rather than carrying an old figure forward as though it were current.
How many pallets fit in a trailer
Enter the pallet size. The calculator tries the pallets loaded straight and turned and keeps the better result.
Pallets that fit
30 on the floor.
Based on inside floor dimensions and a typical cargo weight limit. Real trailers vary by a few inches and a few hundred pounds. Confirm with us before you load.
How long a truckload takes
Federal hours of service rules let one driver drive up to 11 hours in a shift, followed by 10 hours off. That works out to roughly 500 to 550 miles a day. Enter the distance of your lane.
Typical transit with one driver
About 7 hours of driving, not counting loading, unloading or traffic.
A planning estimate, not a delivery promise. Appointment times, dock hours, weather and mountain passes all change the real answer.
Questions shippers ask
- How much is a full truck load?
- It depends on the lane, the trailer and the day. Pick an origin, a destination and a trailer in the calculator above to see today’s low, typical and high estimate, or read the table of every lane we publish today. For your own load, ask for a quote.
- Is the calculator’s figure a quote?
- No. It is an estimate computed by our pricing model for the date shown. A quote is specific to your freight, docks and pickup date, and we give one through the quote form or by phone.
- Does the estimate include fuel?
- Yes. Every figure is the linehaul with diesel already counted at that week’s federal diesel price. Detention, lumper fees, extra stops and similar charges are added only when a load needs them.
- How often do the numbers change?
- The model rebuilds every estimate once a day, early in the morning Pacific time, and the calculator shows the date each figure was computed.
- Why is there no estimate for my lane?
- The model only prints a figure where our own lane history is deep enough to price it with confidence. Any other lane is priced by hand: send the quote form with both cities and your pickup date.
Ready to price a load?
Send the quote form or call us. Quotes within 15 minutes, Monday to Friday 6 AM to 6 PM Pacific; operations team available 24/7 for active loads.