Pallet Storage at Our Warehouse in Mentone, CA
Lifetime Logistics offers pallet storage at our warehouse in Mentone, CA, where palletized freight is received, labeled, stored and released onto trucks we run or arrange. Storage is usually priced per pallet per month, with handling charged on the way in and the way out, and every job is reviewed case by case before we take it. To ask about your pallets, use the quote form on this page or call (562) 566 8953.
What it looks like with us
Your freight arrives on pallets, waits with us, and leaves on a truck when your customer or next facility needs it. That makes three moments worth getting right: the count at receiving, the label on each pallet, and the release paperwork, and the sections below cover each one.
We handle short term and long term storage, overflow when your own building is full, and seasonal storage when product shows up ahead of a selling window. Each job is accepted at our discretion, so Alex and the team look at what you are storing, how long it needs to stay and how it will move before we say yes. You can see everything else the building does on our warehousing page.
Receiving: when your pallets arrive
Receiving is where most storage problems start or get stopped. On a typical receipt, the pallets are counted against the bill of lading or packing list, checked for crushed corners, torn wrap, leaning stacks or wet cartons, and any shortage or damage is written on the delivery paperwork before the driver leaves. That note is what protects you if a claim comes up later with the carrier.
Freight can reach us a few ways. It can come off a container from the Ports of Los Angeles or Long Beach, either unloaded here through container destuffing or delivered already palletized. It can come in on a 53 foot dry van, a box truck or a partial load from another warehouse or a manufacturer. However it shows up, the goal at the door is the same: know exactly what arrived and what condition it was in.
Labeling and storing palletized freight
Every pallet in storage needs to be identifiable without unwrapping it. In general practice that means a clear label on at least one face showing the item or SKU, the quantity, your PO or reference number and anything else you use to tell one pallet from the next. If your pallets come in without labels, or with labels your customer will not accept, labeling can be added as extra work and quoted on top of storage.
Once labeled, pallets are put away so they can be found and pulled when you ask for them. Mixed SKU pallets, lot numbers and items you plan to ship separately are worth telling us about before the freight arrives, because they change how pallets are grouped. If part of the job turns into breaking pallets down and building orders, that becomes pick and pack and is priced as its own line.
Releasing pallets and getting them back on the road
When you are ready for pallets to leave, you send a release with the quantity, the items, the pickup date you are aiming for and the delivery address. Release paperwork usually includes a bill of lading signed at the door and a count of what went out, so your records and ours match.
The outbound truck can be yours, your customer's, or one we provide. We run our own 53 foot dry vans based in Southern California, and as a licensed broker we arrange flatbeds, step decks, box trucks, sprinter vans and partial or LTL loads through carriers we vet. Full trailers headed out of the area move on dry van trucking. Pallets that only pass through are a cross docking job instead.
How it is usually priced
Storage is usually priced per pallet per month. A pallet that sits for part of a month is often billed for that month, so it helps to plan receipts and releases with that in mind. Handling is charged separately, once when a pallet comes in and once when it goes out, because that is when the forklift and the labor are actually working your freight.
Anything beyond receiving, storing and releasing is quoted on top. That includes labeling, rewrapping or restacking a pallet that arrived unstable, pick and pack, and inventory counts you ask for outside a normal release. Trucking is quoted on its own as well. We put each of these on the quote as its own line so you can see what you are paying for.
What your pallets should look like
Good storage depends on good pallets. Use a sound, standard size pallet with no broken boards or missing deck pieces, stack cartons squarely so nothing hangs over the edges, and stretch wrap the load tight enough that it does not sway when it is lifted. Heavy cartons belong on the bottom, and the load should be stable enough to handle safely without leaning.
Tell us up front about anything unusual: heavy pallets, tall or oversized loads, fragile goods, or product that cannot be stacked. Pallets that arrive damaged or unsafe may need rework before they can be put away, and that work is quoted on top of storage. Freight needing temperature control, and anything outside normal palletized dry goods, should be discussed before booking so we can decide whether the job fits.
Location, ports and asking for a quote
Mentone works well for freight coming inland from San Pedro Bay. The Port of Los Angeles is about 83 miles away and the Port of Long Beach about 81 miles, each about 105 minutes of driving without traffic by way of State Route 38, Interstate 10, Interstate 215, State Route 91 and Interstate 710. Ontario is about 31 miles and about 40 minutes without traffic, and downtown Los Angeles is about 66 miles and about 80 minutes without traffic. More on the area is on our Mentone warehouse page.
Moving containers off the terminal quickly also matters, because terminals and ocean carriers charge demurrage and per diem once free time runs out. Getting freight unloaded and into storage can help you stay ahead of those charges, though how quickly that happens depends on the job and the space at the time.
If you have pallets that need a place to sit, send us the pallet count, what is on them, how they will arrive, how long you expect them to stay and how they will leave. Use the quote form on this page or call (562) 566 8953, and Alex or someone on the team will look at your job and come back with a quote.
How far is Mentone from the ports?
| From Mentone to | Road miles | Drive time | Main roads |
|---|---|---|---|
| The Port of Long Beach | 81 | 1 h 45 min | State Route 38, Interstate 10, Interstate 215, State Route 91, Interstate 710 |
| The Port of Los Angeles | 83 | 1 h 45 min | State Route 38, Interstate 10, Interstate 215, State Route 91, Interstate 710 |
Questions shippers ask
- How is pallet storage usually priced?
- Storage is usually priced per pallet per month. Handling is charged separately when each pallet comes in and again when it goes out, since that is when the labor and equipment are working your freight. Extra work such as labeling, rewrapping, restacking or pick and pack is quoted on top. Trucking to or from the warehouse is its own line. Your quote lists each piece so you can see where the cost comes from before anything ships.
- Do you have space for my pallets right now?
- That depends on the day and the job. Every warehousing job is reviewed case by case by Alex and the team, and each one is accepted at our discretion. Space, timing and fit all change, so we do not commit to space before seeing the details. The way to find out is to send a quote request with your pallet count, the product, expected arrival and how long the pallets will stay.
- What condition do my pallets need to be in?
- Pallets should be sound and standard sized, with no broken boards. Cartons should be stacked squarely without hanging over the edges, heavy cases on the bottom, and the whole load stretch wrapped tight so it does not sway when lifted. A clear label showing the item, quantity and your reference number helps a lot. Pallets that arrive damaged or unstable may need rework before put away, and that work is quoted separately.
- Can you pick up my freight and deliver it after storage?
- Yes, trucking pairs with the warehouse. We run our own 53 foot dry vans based in Southern California and offer power only, where our tractor and driver pull your trailer. As a licensed broker we arrange flatbeds, step decks, box trucks, sprinter vans, hot shot, expedited and partial or LTL loads through carriers we vet before every load. Port drayage from Los Angeles and Long Beach runs through drayage carriers we vet.
- Can containers from the ports go straight into storage?
- They can, once the freight is out of the box and on pallets. Floor loaded cartons have to be built onto pallets first, which is quoted as container destuffing. Tell us how the container is loaded and the pallet count you expect, and we can plan the receiving count and labels before it arrives.
- How far is the Mentone warehouse from the ports?
- Our warehouse in Mentone, CA is about 83 miles from the Port of Los Angeles and about 81 miles from the Port of Long Beach. Each run is about 105 minutes of driving without traffic, using State Route 38, Interstate 10, Interstate 215, State Route 91 and Interstate 710. Real drive times depend on traffic and terminal conditions, which in Southern California can add a good deal of time on any given trip.
Ready to price a load?
Send the quote form or call us. Quotes within 15 minutes, Monday to Friday 6 AM to 6 PM Pacific; operations team available 24/7 for active loads.