Freight Consolidation at Our Mentone Warehouse
Freight consolidation at Lifetime Logistics means partial loads from several of your suppliers come into our warehouse in Mentone, CA, sit together until the load is built, and leave as one full truckload instead of several separate LTL shipments. It usually pays off when those smaller shipments are headed to the same place and together fill most of a 53 foot trailer. To find out whether your freight fits, send the details through the quote form on this page.
How a consolidated load comes together in Mentone
You tell us which suppliers are shipping, roughly what each one is sending, and where the combined load needs to end up. Each supplier delivers to our warehouse in Mentone, CA, or we arrange the pickup, and each inbound shipment is received, checked against what you told us to expect, and staged with the rest of your freight.
Once enough freight is on the floor to make a sensible truckload, or once your ship date arrives, we load it into one trailer and send it out as a single move. One bill of lading and one delivery appointment replace a stack of separate ones, and your receiver unloads one truck instead of signing for several carriers at different times.
If some freight needs to wait longer than planned because a supplier runs late, it can sit in pallet storage until the rest catches up. That flexibility is the real difference between consolidation and a straight cross dock, where freight is meant to keep moving.
When one truckload costs less than several LTL shipments
LTL carriers price each shipment on its own, based on weight, freight class, distance and any extra services at pickup or delivery. Five suppliers shipping five pallets each to the same distribution center means five separate bills, five sets of accessorial charges and five chances for a pallet to get handled through a terminal along the way.
Consolidation starts to make sense when the combined freight fills a large share of a 53 foot trailer and is headed to one destination or a short string of stops. At that point, the cost of one full truckload plus the handling at the warehouse often comes in under the total of the separate LTL bills. When the freight is light, scattered across many destinations, or needed at once, separate partial and LTL shipments can still be the better answer, and we will tell you that.
The other savings are harder to put on an invoice but just as real: fewer hand offs through LTL terminals, less damage risk, and a receiver who books one appointment. We run the comparison with your actual shipment details before anything moves.
How handling and storage are usually charged
In general, warehouse work in this industry is priced in pieces. Storage is usually charged per pallet per month for anything that stays in the building, and handling is charged when freight comes in and again when it goes out.
Extra work such as labeling, stretch wrapping, building mixed pallets or pick and pack is normally quoted on top of the basic handling. For a consolidation program, the trucking out of Mentone is quoted as its own line, so you can see what the warehouse costs and what the truck costs side by side.
We put every piece in writing on the quote before your first supplier ships, so the comparison against your current LTL spend is built on real numbers instead of guesses.
Pulling freight from the ports and inland suppliers
Consolidation pays when the suppliers are close to Mentone or to the ports. Inland Empire suppliers along Interstate 10 can drop partial loads here on a short run, and port freight arrives by drayage, so the full trailer leaves from one dock instead of several.
Plenty of consolidation work starts at the water. The Port of Los Angeles is about 83 miles from Mentone and the Port of Long Beach about 81 miles, each roughly 105 minutes without traffic by way of Interstate 10, Interstate 215, State Route 91 and Interstate 710. Containers come off the San Pedro Bay terminals on a chassis behind a drayage truck, through port drayage carriers we vet, and at our warehouse the freight can be destuffed, checked and staged with domestic supplier freight going to the same customer.
Terminals and ocean carriers charge demurrage and per diem once free time runs out, so the container side of a job needs to move steadily even when the outbound load is still building. Unloading the box and returning the empty to the terminal or an empty yard keeps those charges from stacking up while your freight waits under a roof.
The trucks that carry the finished load
Most consolidated loads leave Mentone in one of our own 53 foot dry vans based in Southern California, running across the 11 western states we serve. If you already have trailers, power only works too: our tractor and driver pull the trailer you supply. On lanes with steady volume, a drop trailer can sit at the warehouse and fill as freight arrives.
Freight that does not belong in a van, such as machinery or long material, goes out on flatbeds or step decks that we arrange as a licensed broker through carriers we vet before every load. The same goes for box trucks, sprinter vans, hot shot and expedited moves when a small piece of the order has to go ahead of the rest.
Because we are both the trucking company and the licensed broker, USDOT 3711199 and MC 1302550, the person building your load at the warehouse is the same person arranging the truck. You get one contact for the whole move, and more on the outbound side is on our dry van trucking page.
How we decide on a job and what to send us
Each warehousing job, consolidation included, is accepted at our discretion after Alex and the team look at the freight, the suppliers involved, the timing and the destination. We do not hold space in advance or commit to a ship date before reviewing the details, because every program puts different demands on the floor and the trucks.
The more you tell us up front, the sharper the answer. List your suppliers and where they ship from, rough pallet counts and weights for each, what the freight is, how it is packaged, where the combined load is going, and what you are paying in LTL today if you know it. If your program also involves overflow or longer holds, our warehousing overview covers the other work done in Mentone.
When you are ready to compare a consolidated truckload against your current LTL shipments, request a quote through the form on this page and we will reply with a straight answer on whether it makes sense for your freight.
How far is Mentone from the ports?
| From Mentone to | Road miles | Drive time | Main roads |
|---|---|---|---|
| The Port of Long Beach | 81 | 1 h 45 min | State Route 38, Interstate 10, Interstate 215, State Route 91, Interstate 710 |
| The Port of Los Angeles | 83 | 1 h 45 min | State Route 38, Interstate 10, Interstate 215, State Route 91, Interstate 710 |
Questions shippers ask
- How many suppliers can you consolidate into one truckload?
- There is no fixed count. What matters is whether the combined freight fits a trailer and heads to the same destination or a short run of stops. Two suppliers shipping large orders can fill a 53 foot van just as well as six suppliers shipping a few pallets each. Send us the supplier list with rough pallet counts and weights, and we will tell you whether a single load makes sense or whether some freight is better shipped on its own.
- How long will my freight wait at the warehouse before the truck leaves?
- That depends on when your last supplier delivers and the ship date you set. Consolidation is built around holding freight until the load is complete, unlike a cross dock, which in industry terms usually moves freight out within a day or two. We do not commit to a release date before reviewing the job. If a supplier runs late, the freight already in Mentone can stay in storage until the rest arrives, and the quote says how that storage is charged.
- Is consolidation always cheaper than shipping LTL?
- No. It tends to save money when several partial shipments are going to the same place and together fill most of a trailer. When the freight is light, spread across many destinations, or needed right away, separate LTL shipments can cost less once warehouse handling is added. We compare both options using your actual shipment details and will tell you plainly if LTL is the better fit, and we can arrange those LTL loads as a licensed broker as well.
- Can you combine import containers with domestic supplier freight?
- Yes, that is common. Containers from the Ports of Los Angeles and Long Beach come to Mentone through drayage carriers we vet, get destuffed and checked, and the freight is staged alongside pallets from your domestic suppliers. The empty container then goes back to the terminal or an empty yard, which helps keep demurrage and per diem charges from building while the outbound load is still being put together. Each job is still reviewed before we accept it.
- What do you need from me to quote a consolidation program?
- Give us the names and pickup cities of your suppliers, rough pallet counts, weights and dimensions for each shipment, what the freight is and how it is packed, the delivery address for the combined load, and any appointment or labeling requirements at the receiver. If you know what you currently spend on LTL for these shipments, include it, because that is the number we are trying to beat. The quote form on this page collects all of it.
- Do my suppliers deliver to you, or do you pick up from them?
- Either works. Suppliers in Southern California can drop freight at our warehouse in Mentone with their own carrier, or we can arrange the pickups using our own trucks or carriers we vet as a licensed broker. Some programs mix both, with nearby vendors delivering and farther ones getting picked up. Tell us where each supplier ships from and we will lay out the inbound plan alongside the outbound truckload when we quote the job.
Ready to price a load?
Send the quote form or call us. Quotes within 15 minutes, Monday to Friday 6 AM to 6 PM Pacific; operations team available 24/7 for active loads.