Skip to content

Warehousing Quote Checklist: What to Have Ready Before You Ask

A good warehousing quote checklist covers six things: what the freight is, how many pallets, their dimensions and weight, the dates it arrives and leaves, how much moves in and out, and any special handling it needs. When Lifetime Logistics gets those details up front, Alex and the team can look at the job properly at our warehouse in Mentone, CA and come back with a clear answer instead of a string of questions. Gather what you have, then send it through the quote form on this page.

Get a freight quote

From a few pallets to a full truckload in 11 western states. Quotes within 15 minutes, Monday to Friday 6 AM to 6 PM Pacific; operations team available 24/7 for active loads.

We may call you about this quote. We never send text messages to this number.

We use these details to answer your request. See our privacy policy.

Start by describing the freight itself

Tell us what is actually on the pallets or in the cartons. Furniture, packaged food, auto parts, retail goods and building materials all behave differently on a forklift and in a stack, so a plain description such as boxed housewares on shrink wrapped pallets tells us far more than a commodity code by itself.

Mention whether anything is fragile, heavy for its size, oddly shaped or sensitive to being stacked. If the product has a value that matters for how it is handled, say so. We would rather know about a quirk before the trailer backs in than discover it with a pallet jack under the load.

If the freight is regulated in any way, flag it in the first message. Some products simply are not a fit for our building, and saying so early saves both sides time. Each job is accepted at our discretion once we understand what it involves, so honest detail here helps the answer come back faster.

Pallet count, dimensions and weight

Give us a pallet count, or a carton count if the freight arrives loose. Then add the dimensions of a typical pallet: length, width and height including the pallet itself. Height matters more than most shippers expect, because it decides whether a position can be stacked and how the space gets used.

Weight per pallet is the next line on the checklist. A rough figure is fine if you do not have a scale ticket yet, but tell us it is an estimate. Heavy pallets change how freight is stored and moved, and a total weight for the whole shipment helps us plan the trucking side as well.

If the pallets are mixed sizes, list each size and how many of each. If the freight is floor loaded in a container or trailer, tell us the carton dimensions and roughly how many cartons. That one detail decides whether the job needs palletizing labor, which is quoted on its own. Our pallet storage page explains how pallets are handled once they are in.

Dates, and how long the freight will stay

Share the date you expect the freight to arrive and the date you expect it to leave, even if both are rough. A container that lands next week and ships out a few days later is a different job from a seasonal buildup that sits for months before a selling window.

Tell us whether the storage is short term, long term, overflow while your own building is full, or a one time hold. Flexible dates are worth mentioning too, because they give us room to fit the work around freight already in the building.

We never commit to space or a date in advance of looking at the job. Each request is reviewed case by case, and the quote is where we tell you what we can do. For freight that should not sit at all, a cross dock usually moves freight out within a day or two in general industry practice, and you can read more on our cross docking page.

In and out volume and how the freight moves

Describe how the freight comes in: one container, a few full trailers, a steady stream of partial loads, or freight we pick up for you. Then describe how it goes out. Full pallets to one distribution center is a simple outbound; small orders to many addresses is a different kind of work entirely.

Give an idea of volume over time if the job repeats. Something like about a trailer in and a few pallets out each time an order lands is enough to start. We are looking for the rhythm of the account, not a perfect forecast, because rhythm drives labor and space more than any single number.

Note who your receivers are if you know them. Big retail distribution centers often have strict appointment and labeling rules, and those requirements belong on the checklist. If outbound orders are small and frequent, our pick and pack service may be part of the conversation.

Special handling, and how pricing is usually built

List any work beyond receiving and storing. Common examples are labeling, rewrapping, repalletizing, sorting by SKU, counting cartons, building mixed pallets and consolidating several suppliers into one outbound load. Each of these takes time on the floor, so naming them early keeps the quote accurate.

In general, warehouse storage is priced per pallet per month. Handling is usually charged when freight comes in and again when it goes out. Extra work such as labeling, wrapping or pick and pack is quoted on top of storage and handling. That structure is why pallet count, duration and handling needs sit at the center of this checklist.

If you are not sure whether something counts as special handling, include it anyway and let us sort it out. A line that turns out to be routine costs nothing to mention, while a surprise found at the dock usually means the job has to be looked at again.

Container freight from the Ports of Los Angeles and Long Beach

For import containers, add the container size, the terminal, the ocean carrier, the expected arrival and the last free day if you have it. Containers come off the San Pedro Bay terminals on a chassis behind a drayage truck, and the clock starts once the box is available. We arrange port drayage from the Ports of Los Angeles and Long Beach through drayage carriers we vet.

At a transload warehouse the freight is unloaded, checked, and either stored or reloaded into 53 foot trailers, and the empty container goes back to the terminal or an empty yard. Terminals and ocean carriers charge demurrage and per diem when free time runs out, so the dates on your checklist carry real weight here. Our container destuffing page walks through the process.

Mentone sits at the east end of the Inland Empire in San Bernardino County, next to Redlands. It is about 83 miles to the Port of Los Angeles and about 81 miles to the Port of Long Beach, each roughly 105 minutes of driving without traffic on State Route 38, Interstate 10, Interstate 215, State Route 91 and Interstate 710. Plan your container dates with that run in mind.

Outbound trucking, and sending the request

Tell us where the freight goes after the warehouse and whether you want us to move it. Lifetime Logistics Services LLC is a licensed freight broker and trucking company, USDOT 3711199 and MC 1302550, serving 11 western states. We run our own 53 foot dry vans based in Southern California, offer power only when you supply the trailer, and set up drop trailers on lanes with steady volume.

For freight that needs a different truck, we arrange flatbeds, step decks, box trucks, sprinter vans, hot shot, expedited and partial or LTL loads as a broker, through carriers we vet before every load. Putting the outbound plan on the same request lets us look at storage and trucking together rather than as two separate puzzles.

Once you have the freight description, pallet details, dates, volume and handling needs together, send them through the quote form on this page. Partial information is fine to start. Alex and the team will review it, ask what is missing, and tell you plainly whether the job fits. Request your quote today and we will take it from there.

From our own loads

Our dispatch records for the 12 months to October 2026, every lane we ran. Ranges, not counts, so no customer can be picked out.

Trailers
about 8 in 10 dry van, about 1 in 10 flatbed, about 1 in 10 power only, the rest box truck, sprinter van and hot shot
Typical transit
1 day
Busiest months
October and May
Hauled by
mostly partner carriers we vet

Questions shippers ask

What is the minimum information I need to get a warehousing quote?
At minimum, tell us what the freight is, roughly how many pallets or cartons, the typical pallet size and weight, and when it arrives and leaves. With those four pieces we can usually tell whether the job is worth discussing further. Volume over time and special handling sharpen the quote, but they can follow in a reply if you do not have them yet.
Can I ask for a quote if my dates are not confirmed yet?
Yes. Give us your best estimate and say it is an estimate. Many shippers are still waiting on a vessel or a production run when they first reach out. We review every job case by case and never commit to space or a date before the quote, so a rough window is a perfectly reasonable place to start the conversation.
How is warehouse storage usually priced?
Storage is usually priced per pallet per month. Handling is charged as freight comes in and again as it goes out. Extra work such as labeling, wrapping, repalletizing or pick and pack is quoted separately on top of storage and handling. That is why pallet count, how long freight stays and the handling it needs are the core of any warehousing quote request.
Do you accept every warehousing job that comes in?
No. Each job is accepted at our discretion after Alex and the team look at the freight, the timing and what the work involves at our warehouse in Mentone, CA. Some jobs are a good fit and some are not. The quote request is the step where we figure that out together and give you a straight answer either way.
What should I include for an import container?
Include the container size, the terminal at the Port of Los Angeles or Long Beach, the ocean carrier, the expected availability date and the last free day if you know it. Say whether the freight is palletized or floor loaded. Terminals and ocean carriers charge demurrage and per diem once free time runs out, so accurate dates help everyone plan the pickup and return.
Why do pallet height and weight matter so much?
Height decides whether a pallet can be stacked and how much of a storage position it takes up. Weight affects how the pallet is moved, where it can sit and how the outbound truck is loaded. An estimate is fine at first, but noting both lets us read the job correctly instead of guessing and revising the quote later.
Can you handle the trucking as well as the storage?
Yes. We run our own 53 foot dry vans based in Southern California, offer power only and drop trailers on lanes with steady volume, and arrange flatbeds, step decks, box trucks, sprinter vans, hot shot, expedited and partial or LTL loads as a licensed broker through carriers we vet. Port drayage from Los Angeles and Long Beach runs through drayage carriers we vet.
What counts as special handling on a quote request?
Anything beyond unloading, storing and reloading. Common examples are labeling, rewrapping, repalletizing, sorting by SKU, counting cartons, building mixed pallets, pick and pack and consolidating freight from several suppliers. Retailer routing or labeling rules also belong here. If you are unsure whether something qualifies, list it and we can say how it fits into the quote.

Ready to price a load?

Send the quote form or call us. Quotes within 15 minutes, Monday to Friday 6 AM to 6 PM Pacific; operations team available 24/7 for active loads.

Call (562) 566-8953Get a quote