Pick and Pack at Our Warehouse in Mentone, CA
Lifetime Logistics handles pick and pack at our warehouse in Mentone, CA, pulling units from your stored inventory, building each order into cartons or onto pallets, labeling it and loading it onto the truck that takes it out. Because we run our own 53 foot dry vans and arrange other equipment as a licensed broker, an order can stay with one team from storage to the delivery dock. To get pricing for your orders, send us the details through the quote form on this page.
What order picking means at our Mentone warehouse
Pick and pack is the step between inventory sitting in storage and an order leaving on a truck. Your goods arrive and get put away at our warehouse in Mentone, CA, and when an order comes in, we pull the items it calls for, pack them the way that order needs, and stage the finished shipment for pickup. It is hands on work, and I would rather walk you through it plainly than hide it behind a buzzword.
Most shippers who ask about it already store with us or plan to, often as pallet storage that gets broken down as orders arrive. Some send product in on full pallets and need it to go out in smaller pieces; others need mixed orders assembled for a retailer or a distributor. The idea is the same either way: what is on the order is what goes in the carton or on the pallet.
Building orders from your stored inventory
Every order starts with the details you send: which items, how many, and where they are going. We locate those items in storage, pull the quantities requested, and check what we pulled against the order before anything gets packed. Counting twice at this point costs far less than a short shipment discovered at the receiving dock.
Keeping counts accurate depends on how inventory is received and put away from the first day, which is why order work usually goes hand in hand with inventory handling. When product comes in clearly marked and organized, pulling it later is straightforward. When it comes in mixed or unmarked, we tell you up front, because that changes the work involved.
If an order calls for more than what is on hand, we contact you before it ships rather than sending it short and leaving you to sort it out with your customer.
Cartons, pallets and labeling
Small orders usually go out in cartons. Larger ones, or orders headed to a distribution center, are usually built on pallets, stacked so the weight sits low and the load stays square, then wrapped so it travels as one piece. The right choice depends on what your receiver accepts and how the freight will move, and we talk that through with you before the first order goes out.
Labeling is where a lot of orders go wrong. Carton labels, pallet labels and shipping labels all have to match the order and whatever the receiving dock asks for. Large retail and distribution receivers often publish their own routing and labeling rules, and a pallet that arrives without the right marks can be refused or charged back. Send us those requirements with the order, and we apply the labels to match.
How a packed order reaches the truck
A finished order is staged for loading and goes out on the equipment that fits it. Full trailer loads can ride on our own 53 foot dry vans based in Southern California, covered on our dry van trucking page. Shipments that do not fill a trailer can move as partial and LTL freight, arranged as a licensed broker through carriers we vet before every load.
When several orders are headed the same direction, combining them on one truck can make more sense than sending each alone, and that is what freight consolidation is for. Box trucks and sprinter vans, also arranged through vetted carriers, suit deliveries too small for a full trailer that still need to go straight to the receiver.
Because the warehouse and the trucking sit with the same team, the people who pack the order and the people booking the truck are talking to each other, not trading emails between two separate companies.
How order work is usually priced
Across the industry, storage is usually charged per pallet per month, with a handling charge when freight comes in and another when it goes out. Building orders is extra work on top of that, so it is quoted separately, along with other added tasks such as labeling or wrapping.
What shapes the quote is the work itself: how many orders, how many items on each, whether they leave in cartons or on pallets, and what labeling the receivers require. The clearer the picture you give us, the more useful the quote will be, and we write it around your freight instead of reading a figure off a sheet.
Our Mentone location and how jobs are accepted
Orders built in Mentone leave on whatever suits their size: a box truck or sprinter van for a few cartons, a dry van for a full store order. More about the site is on our Mentone warehouse page.
Each order job is accepted at our discretion, after Alex and the team look at the product, the order volume and what the work involves. We would rather turn down a job we cannot do well than take it on and let you down.
If you have inventory to store and orders to build, send the details through the quote form on this page: what the product is, how it arrives, how orders should go out, and where they are headed. Request a quote, and we will come back to you with what we can do for your freight.
How far is Mentone from the ports?
| From Mentone to | Road miles | Drive time | Main roads |
|---|---|---|---|
| The Port of Long Beach | 81 | 1 h 45 min | State Route 38, Interstate 10, Interstate 215, State Route 91, Interstate 710 |
| The Port of Los Angeles | 83 | 1 h 45 min | State Route 38, Interstate 10, Interstate 215, State Route 91, Interstate 710 |
Questions shippers ask
- Do I need to store inventory with you to have orders built?
- In practice, yes. Order building works from inventory already sitting at our warehouse in Mentone, CA, because each order is pulled from what is in storage. Most shippers bring product in on pallets, we receive it and put it away, and orders are built from that stock as they come in. If you only need freight passed through without being stored, cross docking may be a better fit for your shipment.
- What do you need from me with each order?
- Send the items and quantities, the ship to address, whether the order should go out in cartons or on a pallet, and any labeling rules the receiver has published. If your customer is a retailer or distribution center with routing instructions, include those as well. The more complete the order is when it reaches us, the fewer questions we need to ask before it ships, and the lower the chance of a refusal at the dock.
- Can you apply retailer or carrier labels to my orders?
- Yes. Labeling is part of building an order, and we apply carton, pallet and shipping labels to match the order and the receiver's requirements. You can send the labels along with the order, or send the requirements so we know exactly what each carton and pallet needs. Labeling is usually quoted as extra work on top of storage and handling, so mention it when you ask us for pricing.
- How quickly will my orders ship?
- That depends on the job, and it is something we discuss when we quote your work rather than a fixed number we hand out. Order volume, the number of items on each order, labeling requirements and the truck schedule all affect timing. We will tell you plainly what is realistic for your freight before you commit, and if something on an order holds it up, you hear about it from us directly.
- How do packed orders get delivered?
- Full trailer loads can go out on our own 53 foot dry vans based in Southern California. Smaller orders can move as partial or LTL freight, or by box truck or sprinter van, arranged as a licensed broker through carriers we vet before every load. We serve 11 western states, so the same team that builds your order can also book the truck that carries it to the receiver.
- How is order work priced?
- Storage is usually priced per pallet per month, with handling charged when freight comes in and again when it goes out. Picking, labeling and wrapping are extra work quoted on top of that. Your quote depends on order count, items per order, cartons versus pallets and the labeling your receivers need. Every job is accepted at our discretion, so the first step is a quote request with those details.
Ready to price a load?
Send the quote form or call us. Quotes within 15 minutes, Monday to Friday 6 AM to 6 PM Pacific; operations team available 24/7 for active loads.