Inventory Handling at Our Warehouse in Mentone, CA
Inventory handling at Lifetime Logistics means we receive your freight at our warehouse in Mentone, CA, count it against your paperwork, label or relabel it, sort and palletize it, and release it when you tell us what to ship. Alex and the team stay with each job from the first carton that comes off the truck to the last pallet that leaves. To get a quote, use the quote form on this page or call (562) 566-8953.
What inventory handling covers in Mentone
Inventory handling is the hands on work that happens between the moment freight arrives at a warehouse and the moment it leaves. At our warehouse in Mentone, CA, that work is receiving, counting, labeling, relabeling, sorting, palletizing and releasing your goods, plus taking your instructions on what goes out and when.
Most shippers who ask about it are holding product near Southern California for a stretch, splitting a mixed inbound into the right outbound groups, or fixing labels before freight goes to a retailer or a distribution center. It often runs alongside pallet storage when goods sit for a while, or alongside pick and pack when orders go out by the carton instead of by the pallet.
Mentone sits at the east end of the Inland Empire in San Bernardino County, right next to Redlands, so freight handled here is positioned for trucks heading east on Interstate 10 as well as for runs back toward Los Angeles and the ports.
Receiving and counting freight on arrival
Receiving starts at the dock door with the bill of lading or packing list in hand. We unload, look over what came in, and count pieces or pallets against what your paperwork says should be there. Anything that does not line up, such as short counts, extra pieces or visible damage, gets noted so you hear about it while the driver's paperwork is still fresh.
Counting is only as useful as the paperwork behind it. The cleaner your packing list is, with item numbers, quantities and how the cartons are marked, the easier it is to confirm that what arrived matches what you bought or shipped. When a shipment comes in with no list at all, tell us what you expect so we know what to check against.
Freight arrives in many forms: floor loaded cartons from a container, mixed pallets off a 53 foot trailer, or a few pieces off a box truck. Each one is received the same careful way, because a miscount at the door follows the inventory all the way to the outbound truck.
Labeling, relabeling and sorting
Labels are where a lot of freight gets stuck. A retailer may want its own carton labels, a distribution center may require pallet labels in a particular spot, or an importer may need to cover an old mark with a new one before goods move on. We apply the labels you send or specify, and relabel cartons or pallets when the original marks are wrong or no longer apply.
Sorting separates a single inbound into the groups you need going out. That might mean pulling cartons by item number, by purchase order, by store, or by final destination. It is common after a container is unloaded, because product packed for ocean transit is rarely packed in the order it needs to ship by truck, which is why sorting pairs naturally with container destuffing.
Give us the rule you want applied and the label files or instructions that go with it. The clearer the sort rule, the less chance a carton ends up on the wrong pallet.
Palletizing and getting freight ready to move
Once freight is counted, labeled and sorted, it gets built onto pallets that are stable and sized for the trailer and the receiver. That means stacking heavy cartons low, keeping labels facing out where a receiver can read them, and wrapping the load so it holds together through braking and turns.
Some receivers set rules on pallet height, pallet type or how many items can share a pallet. If yours does, send the routing guide or the requirements before the work starts, since rebuilding a pallet after it is wrapped costs everyone time.
Palletized freight can go straight to an outbound truck or sit in storage until you call for it. When product only needs a quick turn, cross docking is the usual fit, and in general industry terms a cross dock tends to move freight back out within a day or two of arrival.
How you tell us what to ship
Nothing leaves our warehouse in Mentone until you tell us to release it. The clearest release lists the reference or purchase order number, the items and quantities, the consignee and delivery address, the pickup date you are aiming for, and the carrier picking up, whether that is your carrier or a truck we arrange.
If the order is partial, say exactly what stays behind. If labels or paperwork must travel with the freight, send them with the release so they are on the pallet when the driver backs in. A release that is missing a detail is one we will ask about before anything moves, because shipping the wrong pallet is harder to undo than waiting a few minutes for an answer.
When the outbound truck is ours, the freight can go on one of our own 53 foot dry vans based in Southern California through our dry van trucking. As a licensed freight broker, with USDOT 3711199 and MC 1302550, we can also arrange flatbeds, step decks, box trucks, sprinter vans, hot shot, expedited, and partial or LTL loads through carriers we vet before every load, across the 11 western states we serve.
Where Mentone sits for inbound and outbound freight
Containers handled here come from the Ports of Los Angeles and Long Beach on a chassis behind a drayage truck, which we arrange through drayage carriers we vet. Mentone is about 83 miles from the Port of Los Angeles and about 81 miles from the Port of Long Beach, each about 105 minutes of driving without traffic by State Route 38, Interstate 10, Interstate 215, State Route 91 and Interstate 710.
After a container is unloaded, checked and either stored or reloaded, the empty goes back to the terminal or an empty yard. Terminals and ocean carriers charge demurrage and per diem once free time runs out, so it helps to plan the handling work around those clocks.
Closer in, Mentone is about 31 miles from Ontario, roughly 40 minutes without traffic, and about 66 miles from Los Angeles, roughly 80 minutes without traffic, both by State Route 38 and Interstate 10. Those routes put handled freight within reach of buyers across Southern California and of carriers running east out of the Inland Empire.
How the work is priced and how jobs are accepted
Warehouse work is usually priced in layers. Storage is commonly charged per pallet per month, handling is charged when freight comes in and again when it goes out, and extra work such as labeling, relabeling, sorting, wrapping or pick and pack is quoted on top. The amount of work depends on how your freight arrives and what you need done to it, which is why we look at each job before putting numbers on it.
Each job is accepted at our discretion. Alex and the team review what you are shipping, how much of it, how long it will stay and what handling it needs, then decide case by case whether it fits. We do not commit space, a date or a turn time until a job is reviewed and agreed.
If you have freight that needs receiving, counting, labeling, sorting or palletizing in the Inland Empire, send us the details: what it is, how it arrives, how many pieces or pallets, and where it goes next. Request a quote through the form on this page or call (562) 566-8953, and we will tell you plainly whether we can take it.
How far is Mentone from the ports?
| From Mentone to | Road miles | Drive time | Main roads |
|---|---|---|---|
| The Port of Long Beach | 81 | 1 h 45 min | State Route 38, Interstate 10, Interstate 215, State Route 91, Interstate 710 |
| The Port of Los Angeles | 83 | 1 h 45 min | State Route 38, Interstate 10, Interstate 215, State Route 91, Interstate 710 |
Questions shippers ask
- What does inventory handling include at your Mentone warehouse?
- It covers the work between arrival and departure: receiving freight off the truck, counting it against your paperwork, labeling or relabeling cartons and pallets, sorting product into outbound groups, building and wrapping pallets, and releasing freight when you tell us what to ship. It can sit alongside storage, pick and pack, cross docking or container unloading, depending on what your freight needs. Every job is reviewed first, and we confirm the scope before work begins.
- How do I tell you what to ship out?
- Send a release that lists the reference or purchase order number, the items and quantities, the consignee and delivery address, the pickup date you are targeting, and who is picking up. If it is a partial release, spell out what stays behind. Include any labels or documents that must ride with the freight. If something in the release is unclear or missing, we ask before anything leaves the building rather than guess.
- What happens if my count does not match what arrives?
- We count pieces or pallets against your bill of lading or packing list as the freight comes off the truck. Short counts, overages and visible damage get noted at the dock so you know about them while the delivery paperwork is still current. That gives you what you need to follow up with your supplier or carrier. A clear packing list with item numbers and quantities makes the check faster and more reliable.
- Can you relabel cartons or pallets for a retailer?
- Yes, relabeling is part of the handling work we take on. Send the label files or the retailer's requirements, including where labels need to go on each carton or pallet. We apply new labels, cover old marks that no longer apply, and build pallets so the labels face out for the receiver. Relabeling is usually quoted as extra work on top of storage and handling, so describe the job when you request a quote.
- How is the handling work priced?
- Warehouse pricing usually comes in parts. Storage is commonly charged per pallet per month, handling is charged on the way in and again on the way out, and extra tasks like labeling, sorting, wrapping or pick and pack are quoted on top. Because the work depends on how freight arrives and what it needs, we look at each job before quoting. Share the commodity, volume, arrival method and handling steps to get an accurate number.
- Can you take freight straight from the ports and handle it?
- We arrange port drayage from the Ports of Los Angeles and Long Beach through drayage carriers we vet. Containers come to Mentone on a chassis, are unloaded, checked, then sorted, labeled, palletized, stored or reloaded as you direct, and the empty goes back to the terminal or an empty yard. Terminals and ocean carriers charge demurrage and per diem once free time ends, so planning early helps. Each job is accepted at our discretion.
Ready to price a load?
Send the quote form or call us. Quotes within 15 minutes, Monday to Friday 6 AM to 6 PM Pacific; operations team available 24/7 for active loads.