Machinery transport for plant and equipment relocations
Lifetime Logistics Services LLC arranges machinery transport when a business relocates production machines, shop equipment, compressors or generators from one site to another. Open deck pieces ride on flatbeds and step decks from vetted carriers, and crated or palletized equipment can go in our own 53 foot dry vans. Call (562) 566-8953 or use the quote form with the weight and size of each piece and both addresses.
From our dispatch records, January through September 2026
- How often we run it
- Several loads a week
- Who hauls it
- Partner carriers
- Drop trailers
- Rare
Who does what on a machinery move?
Three parties share the job: your team, a rigger and the truck. Your staff shuts off and disconnects power, air and fluids. A rigging contractor lifts or skates each machine onto the trailer, or a forklift rated for the weight does it.
We bring the trucks and run the dispatch, and the carrier's driver secures each piece for the road. At the new site the order runs in reverse, so book the rigger for both ends. Our drivers do not rig, lift, level or install equipment.
Which trailer does each machine need?
The way a machine is lifted decides its trailer as much as its size does.
- A flatbed takes machines set on from the side or from above by a crane or a large forklift, and anything that has to be chained down.
- A step deck carries tall machines. Its main deck sits lower than a flatbed, which leaves more height under the legal limit.
- A 53 foot dry van suits crated equipment, control cabinets, tooling, spare parts and anything on pallets that a dock forklift can handle. Our own trucks pull these.
- A 26 foot box truck with a lift gate fits light equipment headed to a site with no dock.
How much weight can one truck carry?
Weight sets the limit long before deck space does. Federal rules cap a loaded tractor and trailer at 80,000 pounds gross, which leaves somewhere near 48,000 pounds of cargo on a standard flatbed and less on a heavier rig.
Each axle group has its own ceiling too, so a heavy machine has to sit where its weight spreads across the axles. Give us the real weight from the manufacturer's plate or a scale ticket, not an estimate.
A piece wider than eight and a half feet, taller than its trailer can legally carry, or heavier than a standard truck takes needs state permits and sometimes escort cars. Oversize work is not routine for us. Send the dimensions and we will say plainly whether one of our partner carriers is set up for it.
Getting machines ready for the road
Prepare every machine before the truck arrives, so the driver is not waiting while work is finished. Drain oil, coolant and fuel where the manufacturer calls for it. Lock moving parts, and take off loose guards or attachments to ship in a crate.
Finished surfaces and electronics need cover. Ask for a tarped flatbed or put those pieces in a van, since rain and road grit do not belong on a control panel. Mark the lifting points on each crate for the rigger at the other end.
Relocating a machine shop or a production line
Plan the trucks around the order you will rebuild the line in. Load the pieces needed first at the new site last, or put them on their own truck, so they come off first. Spare parts, tooling and pallet stock for the line can follow in a dry van.
A move from Los Angeles County to the Inland Empire is a short haul, while a line headed for Arizona or Nevada runs as a standard truckload with one dispatcher on it. When the whole building is moving, pair this page with warehouse relocation for the stock and racking, or business relocation trucking for a move out of California.
What affects the price of machinery transport?
Each machine move is priced on its own details. These shape the number most:
- The weight and dimensions of the heaviest piece, and the total for the load
- The trailer it needs: flatbed, step deck, van or box truck
- Tarps, and any piece that must arrive without a mark
- Distance, and permits or escorts if a piece is oversize
- Time the truck spends waiting while the rigger works, and any extra pickups
Details for a machinery quote
- Each machine: what it is, its weight, and its length, width and height
- How it gets on and off at each end: crane, rigging skates, forklift or dock
- Whether it ships crated, on skids or bare, and if it needs a tarp
- Both addresses, the move dates and the hours each site is open
- Your rigger or crane service and the times they are booked
Questions shippers ask
- Can our forklift load a machine onto a flatbed?
- Yes, if it is rated for the piece and can reach the deck from the side. A flatbed is loaded from the ground beside the trailer rather than from the dock, so the yard needs room for the forklift to work.
- Do you provide the rigger or the crane?
- No. We provide the trucks. Book a rigger or crane service for both ends and give us their schedule, so each truck arrives when they are ready to lift.
- What size flatbed does a machine need?
- A 48 or 53 foot flatbed covers most machines, and tall ones move to a step deck. Send the dimensions and the weight, and we will match the trailer to the piece.
- Can you pick up equipment we bought at an auction?
- Yes. Send the auction site address, how the piece will be loaded there, and the release paperwork. Auction yards often set a short removal window, so tell us the last day for pickup.
Ready to price a load?
Send the quote form or call us. Quotes within 15 minutes, Monday to Friday 6 AM to 6 PM Pacific; operations team available 24/7 for active loads.